Alloy wheels manufacturer and supplier in China: The Flow-Forming Process: A Quick Overview: The flow-forming process is a manufacturing technology used to produce high-performance wheels. Using heat and pressure, the inner barrel of a cast wheel is stretched and compressed, enhancing its tensile strength and durability. Flow-formed wheels are an ideal option for car enthusiasts who want the style and strength of forged wheels but do not have the budget for them. With a combination of superb design options and affordability, flow-formed wheels offer an exceptional solution for performance enthusiasts. Additionally, their elongation characteristics and superior shock resistance make them a superior choice over traditional cast wheels. In sum, the flow-forming process is changing the game in the wheel industry as we know it. Discover even more information at alloy wheels supplier.
To sum up, it can be concluded that aluminum wheels are the product of “high-speed”, “energy-saving” and “modern fashion” of automobiles. With the rapid development and development of the automobile market, aluminum wheels are used to gradually replace the traditional steel ring. The trend has become more and more intense, and there is an infinitely broad market prospect. Many people usually choose a wheel that is larger than the original product when buying a new wheel. The first thing to pay attention to is that the tire and the wheel are two inseparable parts. During the modification process, try to keep the extension diameter of the tire. It is necessary to remain unchanged or to keep the changes as small as possible. One of the main reasons is that if the deviation is too large, the accuracy of the meter will be problematic. It’s not feasible to just increase the wheel size without changing the tires. For example, if the tire size of the original car is 215/60R16 (16 means 16-inch wheels), then if you change to 17-inch wheels, the new tire size should preferably be 225/55R17, or 225/50R17.
The hub of the original OEM factory is produced for the model, and the center hole data of the hub is exactly the same as that of the model. So you don’t need a center ring. The function of the central sheath ring (reducer ring)? When the hub is installed, the center sleeve ring mainly plays a role of positioning and fixing the hub. Make the hub center coincide with the shaft head center. It should be noted that the central sheath does not play the role of bearing. Such as the hub center hole is larger than the vehicle axle head, without the use of the center ring, the vehicle is prone to jitter when driving at high speed. It can be seen that the center ring is a very common and important part of the refitted hub.
The two piece wheel consists of two parts: the rim (Barrel), and the wheel width. It is possible to combine different rim widths and thicknesses on one hub, or to combine widths and offsets for more options. And the two spokes are interchangeable, so that when repairing and replacing, it is not necessary to replace the whole hub, but only the part, which is finally fastened with high-strength bolts. This is the most primitive processing method for aluminum alloy wheels, which can be formed by pouring high-temperature liquid metal into the mold and cooling it. This method is efficient and low cost, but the uniformity of each part of the manufactured wheel is poor, and the molecular density is relatively low, resulting in low strength, so it is not very suitable for high-strength use of passenger vehicles.
Pure electric vehicles are driven by electric motors. Unlike fuel vehicles, the engine combustion is not only loud, but also vibrates greatly. When pure electric vehicles are driving, there is no obvious shaking, and the front of the car does not need an air intake grille. Very quiet in the car. Of course, to drive a pure electric car, you need to master the switch. Many people are prone to motion sickness. Many people are used to driving a fuel car. When you start off with a kick of the switch, the power comes fast, the linearity is very strong, the speed is fast, and the back feeling is full. When braking, the switch is closed, and the power recovery function is added, and the power is lost instantly, and the head-up and nodding movements are more obvious.
One piece forged wheels,Milling and forging,The use of impact or pressure to deform the metal between the upper and lower two against the iron (anvil) to obtain the required block of blanks, blanks after heat treatment and then through the machining center milling and forming, a piece of relatively lighter weight, can achieve the most lightweight dynamic balance better reliability, no hidden gas leakage. The main advantages of steel hubs are simple manufacturing process, relatively low cost and strong resistance to metal fatigue. But the disadvantages are also obvious, such as heavy weight, large inertial resistance, poor heat dissipation and so on.
We not only have the traditional low-pressure casting technology, but also have the high strength and light weight manufacturing technology of “low-pressure casting + spinning”. We always maintain various advanced technology advantages in aluminum alloy wheel manufacturing to meet customers’ needs and lead the industry development. The formula has perfect testing equipment, including material testing machine, hardness tester, solid aluminum alloy containing slag quantitative tester, X-ray diffractometer, bending fatigue tester, radial fatigue tester, biaxial fatigue tester, 13° impact tester, 30°/90° impact tester, salt spray test chamber, humidity and heat test chamber, etc., which can carry out the four major testing areas of wheels (dimensional testing, alloy material performance, reliability and safety, coating. Read additional details on https://www.jjjwheel.com/.