Alloy wheel provider by Jjjwheel? Misunderstanding : do not use the center ring (diameter ring) hub is a good hub. The center ring is called Hub-ring. there are mainly ABS and aluminum alloy. Here is a popular science about the origin and role of the center ring (reducer ring) : Why use the central sheath ring (reducer ring)? Due to the same hole distance (PCD) of different models of the center hole data is not the same, in order to save inventory, the majority of modified hub manufacturers will make the hub center hole data larger, to meet the needs of different models. When the hub center hole is larger than the shaft head, there will be a gap between the shaft head and the hub center hole. At this time, it is necessary to fill the gap between the center ring, to help the hub and the vehicle axle head closely. Read additional info at alloy wheels supplier.
Gravity casting: Alloy aluminum is melted into liquid state and poured into the casting mold, after cooling and solidification, cleaning treatment to get the casting with predetermined shape, size and performance, after molding for mechanical processing (deburring, trimming appearance, polishing) and made. The casting wheels product needs to be molded according to the requirements, and the price is lower for mass production.
Second, the hole distance, screw eye distance and eccentric distance must be suitable for the model. This means that when choosing, you can’t choose the shape you like at will, and you must follow the advice of the technician to consider whether the three distances are suitable. The third is the shape: the complex and dense wheel hub is indeed beautiful and classy, but it is easy to be refused or overcharged when washing the car, because it is too troublesome to wash. The simple wheels are dynamic and clean.
Fuel vehicle: If you use fully synthetic engine oil, a small maintenance every 10,000 kilometers, a single cost of 600 dollar, then 100,000 kilometers need to be maintained 10 times, the total cost is 6,000 dollar, a major maintenance every 30,000 kilometers, a major maintenance Counting 1,000, 100,000 kilometers of maintenance 3 times, the cost is 3,000, so calculated, the total maintenance cost of 100,000 kilometers is 9,000 dollar.
The advantages of alloy wheels are light weight, high manufacturing precision, high strength, low inertial resistance, strong heat dissipation capacity, good visual effects, etc. The disadvantage is that the manufacturing process is complicated and the cost is high. The aluminum wheel hub is the product of “lightweight”, “high speed” and “modernization”, because it has many characteristics that are unmatched by steel wheels: Light weight and obvious energy-saving effect: It is well known that reducing the weight of the vehicle can save fuel, and the wheels located in the driving part with the lowest center of gravity of the vehicle are even more important to reflect the energy-saving effect of the vehicle.
Jiangjin science and technology is a global leading custom alloy wheels suppliers and alloy rims manufacturers. The experience is the best protection for our customer. Jiangjin science and technology was established in 1992. After 28 years of development, it becomes a stable supplier of many famous wheel brands worldwide. The capcity goes 1.5 million piece of wheels per year. Our main products include casting wheels, forged wheels, flow formed wheel. Read even more information on https://www.jjjwheel.com/.