Best custom alloy wheels factory? JWHEEL alloy wheel manufacturers adopt the industry’s advanced casting, spinning, machining, painting and inspection equipment, and at the same time, it is equipped with fully automated robot operation platform and testing equipment to fully meet the product requirements of major high-end customers. The company also sets up a professional team for new product development, design, mold manufacturing, trial production, testing and inspection to provide customers with technical development and support services. Read additional info on alloy wheels supplier.
One is size: don’t blindly increase the hub. Some people increase the wheel hub to improve the performance of the car. Under the condition that the outer diameter of the tire remains unchanged, the large wheel hub is bound to match the wide and flat tire. The lateral swing of the car is small, and the stability is improved. pass by. However, the flatter the tire, the thinner the thickness, the worse the shock absorption performance, and the greater the sacrifice in terms of comfort. In addition, the tires are easily damaged if there are some roadblocks such as stones. Therefore, the cost of blindly increasing the hub cannot be ignored. Generally speaking, it is most appropriate to increase one or two sizes according to the size of the original wheel hub.
If the price of the car is not much different from that of the fuel car, you can choose it, but from the perspective of the current market models, the general car price is more than 20,000 higher than the fuel car of the same level. If you consider the economic cost, it is not recommended to choose a fuel-electric hybrid verb: move. Plug-in hybrid models, the battery life is generally less than 100 kilometers, and the fuel is used when the battery life is exhausted. The price of the car is also much higher than that of the same-level fuel car, but like pure electric vehicles, you can enjoy the green card treatment, only Considering the economic cost, it is also recommended that the higher car price is far more than the extra money for fuel.
One piece forged wheels,Milling and forging,The use of impact or pressure to deform the metal between the upper and lower two against the iron (anvil) to obtain the required block of blanks, blanks after heat treatment and then through the machining center milling and forming, a piece of relatively lighter weight, can achieve the most lightweight dynamic balance better reliability, no hidden gas leakage. The main advantages of steel hubs are simple manufacturing process, relatively low cost and strong resistance to metal fatigue. But the disadvantages are also obvious, such as heavy weight, large inertial resistance, poor heat dissipation and so on.
Gravity casting wheels:This is the most primitive processing method for aluminum alloy wheels, which can be formed by pouring high-temperature liquid metal into the mold and cooling it. This method is efficient and low cost, but the uniformity of each part of the manufactured wheel is poor, and the molecular density is relatively low, resulting in low strength, so it is not very suitable for high-strength use of passenger vehicles. Read more details at https://www.jjjwheel.com/.