Span gas cylinder online shop UK: There are two shielding gases commonly used for arc welding aluminum, and these are argon and helium. These gases are used as pure argon, pure helium and various mixtures of both argon and helium. Excellent welds are often produced using pure argon as a shielding gas. Pure argon is the most popular shielding gas and is often used for both gas metal arc and gas tungsten arc welding of aluminum. Mixtures of argon and helium are probably the next common, and pure helium is generally only used for some specialized GTAW applications.
Low cost, high quality: Argon is widely used because, like CO2, it is low cost. It is odourless, colourless, and known for not reacting to high levels of elements like oxygen or water. So why use it over CO2? As we mentioned, CO2 yields imperfect results, as it leaves openings for oxygen to compromise the weld. Argon, on the other hand, is much more stable and controllable. It keeps the molten weld from getting damaged, becoming brittle and breaking, and can be used with other gases such as helium to enhance the quality. The perfect choice would be a mix of argon and something else. Argon would always be the gas with the largest quantity though.
And for hobby welders and small businesses without the space to spare for a standard-sized cylinder, there’s even the choice of a more practically sized lightweight 2-litre Argoshield Light that takes up less space at home or in a van. Argoshield Universal contains the same amount of oxygen as Argoshield Light but slightly less argon and more CO2. It produces smooth, flat welds with fewer weld defects and with its low spatter performance reduces the need for rework. It’s best used when productivity and low levels of distortion are important – such as semi-automatic, automatic and robotic applications in the automotive industry. Read more info on Calibration Gas Suppliers UK.
The primary task of a shielding gas is to protect the weld pool from the influence of the atmosphere, i.e. from oxidation and nitrogen absorption, and to stabilize the electric arc. The choice of shielding gas can also influence the characteristics of the weld penetration profile. The basic gas for MIG/MAG welding is argon (Ar). Helium (He) can be added to increase penetration and fluidity of the weld pool. Argon or argon/helium mixtures can be used for welding all grades. However, small additions of oxygen (O2) or carbon dioxide (CO2) are usually needed to stabilize the arc, improve the fluidity and improve the quality of the weld deposit. For stainless steels there are also gases available containing small amounts of hydrogen (H2). Zero calibration gas is a gas that does not contain flammable gas. You will need this gas in the calibration of analyser’s or gas detectors. Span calibration gases are a more advanced type of calibration gas. They contain a more precise total make up of detectable gases.
For gas shielded welding processes such as TIG, MIG/MAG, FCAW, shielding gases may be inert gases, such as argon, helium and nitrogen, or argon-based mixtures containing carbon dioxide, oxygen or both. Helium may be added to argon/carbon dioxide mixtures to improve productivity. Carbon dioxide (CO2) may be used, on its own, in MAG and FCAW. With the exception of CO2 , these gases are not defined as hazardous to health under the COSHH Regulations but they are asphyxiants. CO2 has a long-term exposure limit of 5000ppm (8-hour TWA reference period) and 15000ppm short-term exposure limit (15-minute reference period). None of the gases can be seen and none have a smell – so their presence in hazardous concentrations is difficult to detect without prior knowledge or measuring equipment. Source: https://www.weldingsuppliesdirect.co.uk/.